Solar Fence Post Cap Light Suppliers Introduces The Lamp Installation Process And Precautions

Solar Fence Post Cap Light Suppliers introduces the lamp installation process and precautions:

1. Lamp installation process:
2. Reserve the power cord of the lamp. Generally, when installing the water and electricity, you should plan the lamps to be installed and the location of the lamp and leave the power cord of the lamp.
3. Lamp inspection. After the lamp arrives, you should unpack the outer package and check the appearance of the lamp for damage, and then directly power on to check whether it can operate normally before proceeding to install it.
4. Assemble the lamp, assemble the main body of the lamp and the decorative arts.
5. To install the lamp, install the lamp holder, and then connect and install the main body of the lamp.
6. Power-on test.
7. The precautions for installation of lamps are as follows:
   1. Before installing the lamps, you should plan the installation position and type of the lamps and reserve the power cord.
8. The installation height of lamps should be regular, for example, the installation of lamps in the living room should be higher than 2M, because it prevents tall people from standing up and not touching it.
9. Do not install the lamp directly on the ceiling as much as possible. If you want to install it on the ceiling, you should ensure that the weight of the lamp is one-half of the ceiling's bearing capacity.
10. Lamp wiring, lamp ground wire to ground wire, neutral wire to neutral wire, do not connect wrongly, and after wiring, it should be wrapped with anti-leakage tape to ensure safety.